Before starting the discussion of the construction of residential stoves and kitchen ranges, familiarize yourself with the basic materials and accessories used by stove fitters.
Prepared stove fitters … read on
Before starting the discussion of the construction of residential stoves and kitchen ranges, familiarize yourself with the basic materials and accessories used by stove fitters.
Prepared stove fitters … read on
The figure shows a diagram of a heating system in a cinema. According to this scheme, the outside air is forced by a fan into the filter and humidifier, and then to the heater, from which he is already getting out … read on
The advantages of air heating include:
a) cheaper cost of operation and simplified operation, because smoking only takes place in one place, for a few or even several rooms,
b) reducing the risk of fire,… read on
One ceramic or metal heat generator is used for air heating installation, heats the air to a temperature of 90-95 ° C in the air chamber surrounding the generator. Then the heated air is distributed through the channels into the rooms, … read on
Capacitive electric furnaces. Electricity is used for occasional heating with sheet metal, capacityless stoves and for the most hygienic floor and ceiling heating.
Recently, there is a trend towards … read on
Capacitive gas furnaces. The gas most often used for economic and industrial purposes is a product of dry distillation of solid fuel. Due to the price, gas is not widely used for permanent home heating, … read on
Oil furnace with a water tank.
Non-capillary petroleum furnaces. Due to the high temperature, the surfaces of this type of furnace do not meet hygiene requirements, all the more, that they pollute the air with the products of combustion - oxide … read on
PIECE BEZPOJEMNOŚCIOWE
In addition to heat-storing furnaces, non-capacitive furnaces are also used, that is, they do not accumulate heat and cool down quickly after smoking is stopped. These furnaces are divided depending on the type of fuel used … read on
Vertical section of the furnace with rising and falling channels corresponding to the natural movement of the gases.
To heat the apartment stove evenly, combustion gases from the furnace should be distributed through riser and downfall channels … read on
When connecting the stove to the chimney below, cleaning the furnace of soot is generally unnecessary, for the soot falls as the gases flow ,to the chimney, not, they gather in the channels, cleaning … read on