Convector heaters, part 2

There are a significant number of convector heaters. These also include Purmo type radiators, manufactured from steel sheet with a thickness of 1,25 mm and convection elements with a thickness 0,5 Mm. There are three types of these heaters (type C, V and P) about heights 300, 450, 600 i 900 mm and lengths from 400 into 3000 Mm, at the same time there are no difficulties in obtaining radiators of other dimensions. Construction and technical data of Purmo radiators are summarised in tables.

Selected design parameters of Purmo radiators

A series of such heaters is visible on the left side. On the right, there is a view of panel radiators with De 'Longhi convection inserts. De longhi radiators are produced in several lengths (from 400 into 3000 Mm), in five heights (300, 400, 500, 600 i 900 Mm) and with the spacing of the ribs 33,33 Mm. They appear in 10 types: as panel heaters without covers (Type P10), with side connection (Types 11K, 21K, 22K i 33K) and with lower connection (Typy 10V, 11KV, 21KV and 33KV)., Brugman products also belong to the popular panel radiators, made of steel sheet St. 12.03 with a thickness 1,25 Mm. They are adapted to be supplied with a heating medium with a maximum temperature of + 110 ° C, and the allowable pressure should not exceed 10 barium. Two types are produced (P i C), differing in the method of connection to the installation (bottom or side). One-, two- or three-disc.,

Materials used in electrical engineering Materials used in electrical engineering. Electrotechnical products are manufactured from a wide variety of materials, which, due to their functional properties, have been divided into ... under Electrician
Chimney for a tiled stove The tiled stove is very nice, a pleasant and romantic source of warmth. Usually it is fired with wood, which is self-renewing ... under Architecture
Intermediate foundations – piles and wells Direct foundation of the building takes place then, when the load is transferred to the bearing layer of the soil, located directly under the foundation. If the layer ... under Architecture
Combined tiled stove Combined stove - In terms of the principle of operation and construction, a combined tiled stove is largely similar to a convection tiled stove ... under Heating
The furnace of prof. Adamiecki The furnace of prof. Adamiecki. In years 30 In the twentieth century, professor of the Warsaw University of Technology, Eng. Adamiecki designed a ductless residential furnace with great efficiency ... under Heating
Bricks for the construction of furnaces For the construction of stoves and kitchen cabinets with skillful work, you can use approx 50% ordinary brick. It is best to use a hand brick ... under Heating
Covering wooden roofs of single-family houses with a corrugated sheet Roofs covered with sheet metal are exposed to unfavorable phenomena consisting in settling of moisture on the underside of the sheets, condensation of water vapor, rafting ... under Architecture
Energy storage for latent and chemical heat Latent heat stores use physical properties, i.e.. high heat and low melting point of some compounds. Cartridges containing salt solutions ... under Architecture
Stove fitting tools Stove fitting tools: a) the stove fitting, b) tile cutter, c) Small stove-fitting hammer, d) Big blowout hammer, e) punch ... under Heating
Tasks and division of foundations The task of the foundation is to transfer the weight of the building and all loads acting on the building onto the ground (the burden of people, equipment, snow loads and ... under Architecture