Category Archives: Heating

Air heating, part 3

The figure shows a diagram of a heating system in a cinema. According to this scheme, the outside air is forced by a fan into the filter and humidifier, and then to the heater, … read on

Air heating, part 2

The advantages of air heating include:
a) cheaper cost of operation and simplified operation, because smoking only takes place in one place, for a few or even several rooms,
b) reducing the risk of fire,… read on

Air heating, part 1

One ceramic or metal heat generator is used for air heating installation, heats the air to a temperature of 90-95 ° C in the air chamber surrounding the generator. Then the heated air is distributed through the channels into the rooms, … read on

Capacitive electric furnaces

Electric underfloor heating.

Capacitive electric furnaces. Electricity is used for occasional heating with sheet metal, capacityless stoves and for the most hygienic floor and ceiling heating.

Recently, there is a trend towards … read on

Capacitive gas furnaces

Capacitive gas furnaces. The gas most often used for economic and industrial purposes is a product of dry distillation of solid fuel. Due to the price, gas is not widely used for permanent home heating, … read on

Non-capillary petroleum furnaces

Oil furnace with a water tank.

Non-capillary petroleum furnaces. Due to the high temperature, the surfaces of this type of furnace do not meet hygiene requirements, all the more, that they pollute the air with the products of combustion - oxide … read on

PIECE BEZPOJEMNOŚCIOWE

In addition to heat-storing furnaces, non-capacitive furnaces are also used, that is, they do not accumulate heat and cool down quickly after smoking is stopped. These furnaces are divided depending on the type of fuel used … read on

HEAT STORAGE STOVES part 3

Vertical section of the furnace with rising and falling channels corresponding to the natural movement of the gases.

To heat the apartment stove evenly, combustion gases from the furnace should be distributed through riser and downfall channels … read on

HEAT STORAGE STOVES part 2

When connecting the stove to the chimney below, cleaning the furnace of soot is generally unnecessary, for the soot falls as the gases flow ,to the chimney, not, they gather in the channels, cleaning … read on

HEAT STORAGE STOVES part 1

HEAT STORAGE OVENS

Heat accumulating stoves include normal tiled stoves or those built from ready-made, prefabricated elements. Such a furnace is a heat accumulator, and smoking in it is carried out once or … read on

Materials used in electrical engineering Materials used in electrical engineering. Electrotechnical products are manufactured from a wide variety of materials, which, due to their functional properties, have been divided into ... under Electrician
Chimney for a tiled stove The tiled stove is very nice, a pleasant and romantic source of warmth. Usually it is fired with wood, which is self-renewing ... under Architecture
Intermediate foundations – piles and wells Direct foundation of the building takes place then, when the load is transferred to the bearing layer of the soil, located directly under the foundation. If the layer ... under Architecture
Combined tiled stove Combined stove - In terms of the principle of operation and construction, a combined tiled stove is largely similar to a convection tiled stove ... under Heating
The furnace of prof. Adamiecki The furnace of prof. Adamiecki. In years 30 In the twentieth century, professor of the Warsaw University of Technology, Eng. Adamiecki designed a ductless residential furnace with great efficiency ... under Heating
Bricks for the construction of furnaces For the construction of stoves and kitchen cabinets with skillful work, you can use approx 50% ordinary brick. It is best to use a hand brick ... under Heating
Covering wooden roofs of single-family houses with a corrugated sheet Roofs covered with sheet metal are exposed to unfavorable phenomena consisting in settling of moisture on the underside of the sheets, condensation of water vapor, rafting ... under Architecture
Energy storage for latent and chemical heat Latent heat stores use physical properties, i.e.. high heat and low melting point of some compounds. Cartridges containing salt solutions ... under Architecture
Stove fitting tools Stove fitting tools: a) the stove fitting, b) tile cutter, c) Small stove-fitting hammer, d) Big blowout hammer, e) punch ... under Heating
Tasks and division of foundations The task of the foundation is to transfer the weight of the building and all loads acting on the building onto the ground (the burden of people, equipment, snow loads and ... under Architecture

M	T	In	T	F	S	S
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30

Construction Architecture

House and renovation