Category Archives: Architecture

Chimney for a tiled stove

The tiled stove is very nice, a pleasant and romantic source of warmth. Usually it is fired with wood, which is a self-renewing raw material. So that you can w … read on

The body of an energy-saving building and internal space

A certain difference can be noticed in the lumps of energy-saving houses that use solar energy for heating, which is dictated by the conditions described above. This difference prompted theorists to create the concept of "solar architecture".
Shape of the building, … read on

Designing – Foundation furnace

The foundation furnace is not equipped with a heating insert. There is also no additional heating box or ashtray. It is made of chamotte elements and can be practically anyone … read on

Designing – Convection oven

Before designing a convection oven, we should stock up on the data sheet of the heating cartridge, which we want to apply. As a rule, a scale sketch is attached to the datasheet 1:10. If in the project we do … read on

Thermal storage tanks independent of the building structure

Water tanks, stone and water-stone are a group of containers independent of the building structure. These trays, with high volume and weight, are usually located in the basement. Warm air circulation, which in sunny … read on

Legal regulations for erecting tiled stoves

When installing tiled stoves, being aware of the relevant legal regulations is not easy. On the provisions on fire protection and the height of the chimney and on the permit to use tiled stoves … read on

Notes on the material and technical shaping of the southern walls

Studies carried out in Germany and Switzerland showed, that buildings with ceramic walls, made in years 1925-1935, even though they do not have internal thermal insulation, in some cases they use less fuel oil … read on

Solutions of the southern part of houses with greenhouses

It is difficult to determine the right one, or the optimal size for greenhouses. Its size and form are rather a function of the purpose and architectural solution of the building, especially his southern party, and not a priori of the planned balance sheet … read on

Foundation furnace

The foundation furnace in its classic solution is built of fireclay elements in the place of its setting. In addition to the door, staples or connecting pins and the connection of the exhaust pipe with the chimney can be done … read on

Designing – Chimney stove

The chimney stove does not need a plinth, or brickwork. Because it is delivered already in a ready-to-install condition, we only need to make a connection to the chimney and remember to comply with fire regulations. For … read on

Materials used in electrical engineering Materials used in electrical engineering. Electrotechnical products are manufactured from a wide variety of materials, which, due to their functional properties, have been divided into ... under Electrician
Chimney for a tiled stove The tiled stove is very nice, a pleasant and romantic source of warmth. Usually it is fired with wood, which is self-renewing ... under Architecture
Intermediate foundations – piles and wells Direct foundation of the building takes place then, when the load is transferred to the bearing layer of the soil, located directly under the foundation. If the layer ... under Architecture
Combined tiled stove Combined stove - In terms of the principle of operation and construction, a combined tiled stove is largely similar to a convection tiled stove ... under Heating
The furnace of prof. Adamiecki The furnace of prof. Adamiecki. In years 30 In the twentieth century, professor of the Warsaw University of Technology, Eng. Adamiecki designed a ductless residential furnace with great efficiency ... under Heating
Bricks for the construction of furnaces For the construction of stoves and kitchen cabinets with skillful work, you can use approx 50% ordinary brick. It is best to use a hand brick ... under Heating
Covering wooden roofs of single-family houses with a corrugated sheet Roofs covered with sheet metal are exposed to unfavorable phenomena consisting in settling of moisture on the underside of the sheets, condensation of water vapor, rafting ... under Architecture
Energy storage for latent and chemical heat Latent heat stores use physical properties, i.e.. high heat and low melting point of some compounds. Cartridges containing salt solutions ... under Architecture
Stove fitting tools Stove fitting tools: a) the stove fitting, b) tile cutter, c) Small stove-fitting hammer, d) Big blowout hammer, e) punch ... under Heating
Tasks and division of foundations The task of the foundation is to transfer the weight of the building and all loads acting on the building onto the ground (the burden of people, equipment, snow loads and ... under Architecture

M	T	In	T	F	S	S
						1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31

Construction Architecture

House and renovation