Monthly Archives: February 2013

COAL COMBUSTION PROCESS

COAL COMBUSTION PROCESS

The course of coal combustion in furnaces has 3 periods:

a) evaporation and separation of volatile parts, czyli wytworzenie gazu o podobnych właściwościach jak … read on

EFFECT OF TEMPERATURE CHANGES ON THE FURNACE CONSTRUCTION

EFFECT OF TEMPERATURE CHANGES ON THE FURNACE CONSTRUCTION

The components of the furnace, such as bricks and tiles, expand or contract during heating and cooling. In order to allow the movement of elements during changes … read on

FLUE GAS MOVEMENT IN A FURNACE

FLUE GAS MOVEMENT IN A FURNACE

The movement of the flue gases in the furnace and in the chimney is due to the temperature difference: hot gases as much lighter rise up, and the colder as heavier … read on

HEAT OUTPUT OF THE STOVE

HEAT OUTPUT OF THE STOVE

By using a rational design of the furnace and its proper equipment, it is possible to reduce its weight and size, achieving the same or even greater thermal efficiency than in the case of a furnace. … read on

BASIC TERMS OF HEATING TECHNOLOGY

Before we start discussing the construction and principles of operation of individual types of stoves, we will explain a number of concepts, which we will deal with later in the book.

The roasting process depends on the amount … read on

Materials used in electrical engineering Materials used in electrical engineering. Electrotechnical products are manufactured from a wide variety of materials, which, due to their functional properties, have been divided into ... under Electrician
Chimney for a tiled stove The tiled stove is very nice, a pleasant and romantic source of warmth. Usually it is fired with wood, which is self-renewing ... under Architecture
Intermediate foundations – piles and wells Direct foundation of the building takes place then, when the load is transferred to the bearing layer of the soil, located directly under the foundation. If the layer ... under Architecture
Combined tiled stove Combined stove - In terms of the principle of operation and construction, a combined tiled stove is largely similar to a convection tiled stove ... under Heating
The furnace of prof. Adamiecki The furnace of prof. Adamiecki. In years 30 In the twentieth century, professor of the Warsaw University of Technology, Eng. Adamiecki designed a ductless residential furnace with great efficiency ... under Heating
Bricks for the construction of furnaces For the construction of stoves and kitchen cabinets with skillful work, you can use approx 50% ordinary brick. It is best to use a hand brick ... under Heating
Covering wooden roofs of single-family houses with a corrugated sheet Roofs covered with sheet metal are exposed to unfavorable phenomena consisting in settling of moisture on the underside of the sheets, condensation of water vapor, rafting ... under Architecture
Energy storage for latent and chemical heat Latent heat stores use physical properties, i.e.. high heat and low melting point of some compounds. Cartridges containing salt solutions ... under Architecture
Stove fitting tools Stove fitting tools: a) the stove fitting, b) tile cutter, c) Small stove-fitting hammer, d) Big blowout hammer, e) punch ... under Heating
Tasks and division of foundations The task of the foundation is to transfer the weight of the building and all loads acting on the building onto the ground (the burden of people, equipment, snow loads and ... under Architecture